26x26cm Square Embroidery Frame, Punch Needle, A Variety of Colorful Yarns, Ready-to-use Design

How to make

1. Scan the QR code for video tutorial

DELIVERY IMFORMATION >

Botanical Wooden Cutout [Cactus: 12.5×17.5cm | Sunflower: 12cm x 17.5cm], Mosaic Tiles, Glue, Tweezer

How to make

1. Apply the glue on the surface of cactus cutout
2. Place the mosaic tiles on the glue by tweezer to fill up the space
3. Leave it to dry

DELIVERY IMFORMATION >

Terracotta Pot with Saucer (10cm x 10cm), Mosaic Tiles, Tiles Adhesive, Grout Cement, Wooden Stick, Sponge

How to make

1. Apply glue and attach mosaic pieces. You do have a few minutes to make minor adjustments to your tile position before the glue sets. After applying all of the tiles, let the adhesive cure for 5-6 hours.
2. Apply grout cement between the mosaic tiles with the stick
3. Wipe away excess grout cement. After about 15-30 minutes, use a damp sponge to wipe away any excess grout to reveal the tiles underneath. Wait a few more minutes to let the grout set more. Then, repeat the process to remove any remaining cloudiness or residue on the tiles.
4. Seal the pot with the sponge. Apply a grout sealer to give the pot one final polish.

DELIVERY IMFORMATION >

Live Air Plant, 15cm Square Wooden Frame, Eye-screw Hooks, Coloured String
空氣草、 15 cm 方木框、羊眼釘、彩繩

How to make

1. Screw the hooks into the holes in wood frame. 將羊眼釘扭入木框架內側的孔中
2. Weave the string around the hooks to design your pattern. 將彩繩子來回穿過羊眼釘，設計您的圖案
3. Place your air plants among the string. 把空氣草放在彩繩之中

CARING

Light: Grow best under artificial light or indirect light, avoid direct sunlight.
光照：應放置在在人造光或間接光照下，避免陽光直射。

Water: Once a week. Dunk your air plants in a bowl of water for 10 minutes. Remove the plants from water and spread them on a towel to dry.
澆水：每週一次。 將空氣植物浸泡在水中 10 分鐘，再將植物從水中取出，放在毛巾上晾乾。 在其餘日子，可以每 1-2 天稍微噴濕空氣植物。

Ventilation: Good ventilation as they love fresh moving air. No soil is needed.
通風：需良好通風環境，因為空氣草喜歡流動的空氣。不需要土壤生長。

DELIVERY IMFORMATION >

Tote Bag (35cm(w) x 39cm(d)), Botanical Prints Sticker, Wooden Stick

How to make

1. Cut out your desired graphics or letters and design the position you like
2. Remove the plastic layer at the bottom of the prints
3. Paste them to the preset position on your tote bag
4. Use the wooden stick to scratch them evenly
5. Remove the protective layer at the front

Caution: Do not wash on the day the prints transferred. Not machine washable. Do not tumble dry

DELIVERY IMFORMATION >

High Quality Vegetable Tanned Leather, Botanical Fabric, Waxed Threads and Sewing Needles, Edge Slicker and Burnishing Gum, Leather Embossing Tools

How to make

Scan the QR code to watch the video tutorial

DELIVERY IMFORMATION >

Acrylic board (15cm x 16cm), Scratch Pen, Alphabet Stencil Ruler, Wooden Stand with USB LED Light, Ready-to-use Design PDF File

How to make

1. Prepare your comfortable space and peace of mind
2. Print out the template you would like to scratch from the QR code
3. Optionally add on your own words with the assistance of the ruler or expand your mandala
4. Fix the template on 4 angles of the board by tape
5. Start scratching at the center by the scratch pen and replicate the elements until you fill the first circle
6. Scratch outwards circle by circle until the whole mandala was completed
7. Wash out or wipe it out with a cloth and insert the acrylic board on the wooden stand

Tip:
Put the support on the edge of the board and turn on the light to see it lighten while you draw.

DELIVERY IMFORMATION >

8 Postcards (13.5cm x 10cm), Wooden Stand, Cyanotype Solution A & B, Plastic Sheet, Clamps, Paintbrush, Paper Tray, Dried Leaves

How does it work?

When exposed to the UV light of the sun, a chemical reaction occurs and the postcard changes colour. Use pressed leaves to create unique botanical artworks, or get creative with anything that casts a shadow. Prints are made by placing leaves over the postcard to block out the light. When the postcard is washed, the blocked out areas become white, and the areas exposed to light become a deep blue.

How to make

Step One – Chemicals Mixing and Application
– Mix equal parts of Solution A and B to make a working sensitizer emulsion in yellowish-green color.
– Place the postcard over one plastic sheet
– Coat the emulsion using the brush onto the area of postcard you want, and then leave it to dry or use dryer to help.

Step Two – Print Design
– Lay around with the pressed leaves or anything you want your design to look like.
– Once you find the design you like, cover your design with another plastic sheet and use the clamp to fix the position.
– You might also use a maker writing any words to cast shadow onto the plastic sheet.

Step Three – Sun Exposure
Place the postcard under sunlight for 5-15 minutes.

Step Four – Color Fixation
Remove your design from the paper and rinse the postcard until water runs clear. Hang it to dry and beautiful works are done!

DELIVERY IMFORMATION >

Paper Mâché Model, Patterns of Napkins, White Acrylic Paint and Brush, Decoupage Glue and Brush

How to make

1. Paint the paper mâché by white acrylic paint and dry it
2. Choose your decorative napkin and either tear or cut them up into pieces
3. Tear off the bottom 2 layers from cut napkin, leave the top patterned
4. Spread the glue onto the area to cover in small sections and place a piece of decoupage napkin over the top
5. Leave to dry for around three hours

DELIVERY IMFORMATION >

Paper Mâché Model, Patterns of Napkins, White Acrylic Paint and Brush, Decoupage Glue and Brush

How to make

1. Paint the paper mâché by white acrylic paint and dry it
2. Choose your decorative napkin and either tear or cut them up into pieces
3. Tear off the bottom 2 layers from cut napkin, leave the top patterned
4. Spread the glue onto the area to cover in small sections and place a piece of decoupage napkin over the top
5. Leave to dry for around three hours

DELIVERY IMFORMATION >